Home > Products > Dryer Machine > Concentrate Dryer

Concentrate Dryer

Concentrate Dryer

Applied materials: slag, blast furnace slag, fly ash, cinder, slag, carbide slag, limestone, clay, sand, quartz sand
Concentrate Dryer

Humidity of feeding material: 20±3 (%)

Processing capacity: 10-30 t/h

Applied materials: slag, blast furnace slag, fly ash, cinder, slag, carbide slag, limestone, clay, sand, quartz sand.

slag ardealite limestone mineral clay
More Material

Overview

Concentrate dryer is a kind of drying equipment of processing a large amount of material, it has the advantages of reliable operation, flexible operability, high adaptability, large processing capacity, can dry all kinds of materials and the operation is simple and reliable. It is widely used to dry pellets of iron concentrate, slag, limestone, coal powder, clay and other materials in building material, metallurgy, chemical industry, cement industry. The effect is more obvious especially for pellets of iron concentrate, slag and pulp. After nearly 30 years development of our company, the new generation of drying machine for slag, pulp and pellets of iron concentrate is more energy saving and lower consumption.

Concentrate dryer

Features

1. large processing capacity, less fuel consumption, low dry cost.

2. The pellets of iron concentrate dryer has the characteristic of high temperature resistant, which can use high temperature hot air to dry the materials fastly.

3. High extensible ability, the design considers the production surplus, even the capacity increases a little, there's also no need to replace the equipment.

4.This equipment adopts self-aligning type tug structure, tug with roller ring fit well, which greatly reduces the wear and power consumption.

5.The struction of retaining roller is specially designed, which greatly reduce the horizontal thrust due to the tilting work.

6.Strong ability of overload esistance, stable operation, high reliability.

Concentrate dryer

Parameter

Shell diameter × shell Length Inside diameter of outer shell
(mm)
Inside diameter of inner shell
(mm)
Shell Length
(m)
Shell cubage
(m³)
Shell obliquity Lifting blade form Highest inlet air temperature
(℃)
Dimensions
(m)
Φ1.5×15m 1500 500 15 20.27 3-5% Lifting form 850 16.2×2.7×2.7
Φ1.5×17m 17 22.97 18.2×2.7×2.7
Φ1.5×19m 19 25.68 20.0×2.9×2.9
Φ1.8×21m 1800 650 21 35.91 3-5% Lifting form 850 22.5×2.7×2.7
Φ1.8×23m 23 39.33 24.5×2.9×2.9
Φ1.8×25m 25 42.75 26.5×2.9×2.9
Φ2.2×21m 2200 800 21 58.10 3-5% Lifting form 850 ----
Φ2.2×23m 23 63.61
Φ2.2×25m 25 69.15

SEND INQUIRY

Here you can submit any questions and we will get back to you as soon as possible. We will not disclose the information you submit to anyone, please rest assured.

Your Name
Your E-mail*
Your Telephone
Product Name
If you need specific information about anything about our product, please write here!

Copyright© 2017 Fote Heavy Machinery. All rights reserved     Site Map